• 全國免費熱線:400-606-7090 服務熱線:010-82951699

    您當前的位置:主頁 > 節電裝置系列 > 照明節電類 >
    照明節電類

    智能照明節電控制裝置

    發布日期:2021-04-12 15:59??來源:八環天能電氣


       該裝置是通過調節電路的電壓、電流的幅度,降低燈具和線路的工作溫度,大限度地降低燈光照明電路的電耗,從而達到節電目的。并且可以延長燈具的使用壽命,減少燈具燒損造成的費用開支,大幅度降低用電成本,所節省的電費可為用戶帶來可觀的經濟效益。

    The device is designed to lower the working temperature of lamps and circuits so as to minimize the power consumption of lighting circuits through adjusting the ranges of voltage and current, thus achieving the purpose of saving electricity. Additionally, it is able to prolong the service life of lamps, decrease the expense caused by the damage of lamps, and greatly reduce the electricity cost. The electricity expense saved is indeed considerable.

       智能照明節電控制裝置是一種高科技的智能設備,以現代控制理論為基礎,采用計算機控制方式,產品主控單元采用高位數的微處理器,高速實時采樣市電電 網各種不同狀態,所以在使用過程中,出現何種情況,該裝置輸出的始終是優化電壓值,整個過程無需任何人為調節。由CPU自動采樣、保持、信號處理、判 斷,自動輸出優化電壓。主控單元的EEPROM存儲自身重要數據,保證精確輸出優化電壓。時鐘控制單元采用高精確RTC,具有集成的TCXO和晶體,即使 是在停電的情況下,仍然可保持精確計時,保證數據不會丟失。

    Intelligent lighting electricity-saving control device is of high technology and intelligence and employing the most advanced computer control on the basis of modern control theory. The high-order digit microprocessor adopted in the master control unit of the product samples different statuses of the municipal power grid at high speeds and real times. Therefore, in any situation, the device always provides the optimum voltage in the using process, which is not subject to any artificial adjustment. The CPU makes automatic sampling, reservation, signal processing, and judgment, and generates the optimum voltage. EEPROM of the master control unit stores some important data, and ensures the accurate output of the optimum voltage. The clock control unit adopts the highly precise RTC provided with the integrated TCXO and crystal, which is able to keep the time accurately and prevent the loss of data even when there is a power cut.

     

     
    ILC智能照明節電控制裝置原理圖

    Schematic Diagram of ILC Intelligent Lighting Electricity-saving Control Device

     
    77

     

    時控單元 time control unit
    顯示控制單元 display control unit
    電源 power source
    濾波及浪涌抑制單元 Filtering and surging restraining unit
    節能功率單元 Power-saving unit
    燈具負載單元 Lamp load unit
    交流采樣單元 AC sampling unit
    通訊單元 communications unit
    嵌入式微處理器 embedded microprocessor


    產品特點 
    Product features
     
    實時采樣市電數據,自動輸出優化電壓,可以大量節約電能,節電率高達15%—35%。 
     主回路采用特制元器件,動態多級平滑調節及穩定三相電壓,燈光無閃斷,對電網無諧波污染,綠色環保,延長燈具使用壽命。
     三相設備每相可獨立調節,可操作性強,且保證單相的故障絕不影響其它兩相的正常運行。 
     具有過壓、欠壓、過流保護及自動報警功能。 
     任意一相負載電流過流時,系統自動旁路,負載電流恢復正常,系統自動復位。 
      
    Sample data of municipal power grid at real times, offer the optimum voltage automatically, and save the power by 15% to 35%.
     The main loop employs the especially manufactured component, dynamic multi-level smooth adjustment, and stable three-phase voltage, which are able to offer continuous lighting, eliminate harmonic pollution to power grid, and prolong the service life of lamps.
     Each phase of the three-phase equipment can be adjusted independently, and the failure of a phase will not affect the normal operation of the other two.
     Possess the functions of overvoltage, under-voltage, and overcurrent protection, and automatic alarming.
     When the load of any phase is in the overcurrent state, the system will have an automatic bypass. The load current restores to the normal level, and the system is reset automatically.
     
     
    具有手動強制旁路功能和故障旁路功能。 
     利用時鐘管理模塊, 可控制燈具啟動和停止時間,且每個月份的開關機時間可以單獨設置。 
     人機交互方便、安全、智能控制,實時顯示各相電壓、電流。 
     具有強大的記憶力功能,在斷電后保證系統配置參數不丟失。 
     具有RS232通訊接口,方便數據設定和傳輸。 
     具有故障記錄功能,多可以記錄100組故障信息(如:某年、某月、某日、某時、某分+故障編號) 
     配備路燈監控系統,支持RS485總線通信、電話語音通信、GPRS或GSM無線寬帶通訊方式。(可選) 
     
     Possess the manual compulsory bypass and failure bypass functions.
     With the clock management module, the device can control the starting and stopping times of lamps, and the on-off times in each month can be set up independently.
     Intelligent and safe control of man-human interaction, and real-time display of voltage and current of each phase.
     The powerful memory function ensures the preservation of system configuration parameters after power cuts.
     The RS232 communication interface is convenient for data setup and transmission.
     With the failure recording function, the device is able to record 100 groups of failure information at most (for
     example: a year, month, day, hour, minute + failure number).
     The device is provided with lamp monitor system supporting RS485 bus communications, telephone voice
     communications, GPRS or GSM wireless broadband communications (optional).


    應用范圍
    Application scope 

     市政照明
    Urban lighting 
     城市道路、高速公路、街道廣場、隧道、橋梁、城市亮化工程 
    Urban road, expressway, street square, tunnel, bridge, and urban lighting project;
     商業照明
    Business lighting 
     商場、超市、賓館、酒店、寫字樓 
    Marketplace, supermarket, hotel, restaurant, and office building;
     公共照明 
    Public lighting 
    政府機關、辦公大樓、銀行、醫院、學校、車站、碼頭、地下停車場、加油站、體育場館、度假村、智能商住小區等 
    Governmental organ, office building, bank, hospital, school, station, dock, underground parking lot, filling station, stadium, holiday reserve, and intelligent community
     工廠照明
    Factory lighting 
    紡織、造紙、石油、化工、電力、服裝、食品加工廠等 
    Textile, papermaking, petroleum, chemical, electricity power, garment, and food processing plants;
     交通運輸及其他行業照明
    Lighting for traffic and other industries
     部隊、鐵路、民航等 
    Army, railway, and civil aviation;
     


    上一篇:沒有了
    下一篇:路燈監控系統
    免费能直接看黄的视频,免费啪视频在线观看视频久,免费视频99只有精品视频_第1页